Welch-allyn LC101 CO2 Module - User Manual Bedienungsanleitung PDF herunterladen (Seite 38)

LC101 CO

Module OEM Implementation Manual

Page 38 Conﬁdential Welch Allyn OEM Technologies

Conﬁguration Command Responses

Conﬁguration responses are data packets sent by the Module to the host at programmed

intervals. A single host measurement or auto run mode command initiates unsolicited

transmission of CO

waveform and breath data packets. The programmed interval between

packets is either deﬁned by the host via a conﬁguration command or the host may use the default

setting.

<Wxxyy>, CO

Waveform Data

Includes 4 bytes of CO

waveform data that are sent at the programmed interval during

measurement and auto run modes.

<Wxxyy> where xxyy:

xxyy CO

waveform data mmHg × 256 4*(ASCII)

range: 0 – 99.996 mmHg (0000h – 63FFh)

Example:

= 37.50 mmHg

Module Response Module Response Format

<Wxxyy>

Unsolicited CO

waveform packet at programmed interval

see below

Unsolicited breath data packet at programmed interval

see below

{STX} “W” xx yy CCITT/CRC {ETX} waveform byte string

0x25 0x80 0x79 {STX}W258079{ETX}

02h 57h 32h35h 38h30h 37h39h 03h

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 97 98

Keine Kommentare

Welch-allyn LC101 CO2 Module - User Manual Bedienungsanleitung Seite 38